 |
60 Cuft Big Clem Bulk Blast Machines
Unbeatable for production, strength and safety
Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.
Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.
Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.
Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.
Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces.
|
 |
Big Clem Bulk Blast Machines – 120 Cuft Big clem Bulk Blast Machine
Unbeatable for production, strength and safety
Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.
Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.
Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.
Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.
Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces.
|
 |
160 Cuft Big Clem Bulk Blast Machines
Unbeatable for production, strength and safety
Clemco makes Bulk Blast Machines that outperform every competitive unit on the market. Clemco’s extensive inventory of manual, automatic and remote controls allow flexible configurations to match large scale production needs exactly. A built in Pop-Up valve for quickly loading abrasive and an optional operator controlled Abrasive Cut-off Switch operated at the blast nozzle are a boost to production rates, drastically cutting back on down time.
Big Clems are offered in three sizes: 60, 120 and 160 cubic feet (pressure vessel abrasive volume). Each size is available as stationary, yard towable or highway towable. Nine models give you a wide choice to meet your specific bulk blast requirements.
Superb quality features make the Clemco Big Clem unbeatable! Strong steel frame trailer, axles and wheels not duplicated by any of our competitors. Additional safety is provided through four wheel brakes and emergency break-away switch on highway models and multi-ply tires based on weight loads.
Top and bottom of the blast pressure vessels are fitted with semi elliptical chamber ends. The shape of the bottom of the blast chambers allows freer flow of abrasive by eliminating dead space. All Big Clems are built to strict ASME codes for pressure vessels. Unique to the Big Clem is a 12” X 16” manway located in the side of the pressure vessel to permit access to the chamber interior for cleaning and maintenance.
Clemco’s Big Clems incorporate the latest operator safety technology. The operator has complete control over air and abrasive flow with a fail-to-safe system initiated in an emergency by a “dead man” switch located at the nozzle. The operator can also cut off abrasive flow while maintaining air flow to permit blow off of blasted parts or work pieces.
|
 |
Classic Blast Machines
0.5 and 1 Cuft Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 1028 holds 1/2 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle.
Model 1042 holds 1 cubic foot of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 4 (1/4-inch) nozzle.
Requirements for Operation
These items are required but not included with this equipment:
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
One-man portable industrial-quality blast machines manufactured to ASME code.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
MSV abrasive metering valve maintains smooth, consistent, adjustable media flow.
Approvals and Certifications
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
2 and 3 Cuft Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 1642 holds 2 cubic feet of abrasive providing approximately 15 minutes of blasting at 80 psi with a No. 5 (5/16-inch) nozzle.
Model 1648 holds 3 cubic feet of abrasive providing approximately 15 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
One-man portable industrial-quality blast machines manufactured to ASME code.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
FSV abrasive metering valve maintains smooth, consistent, adjustable media flow.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
6 Cuft Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 2452 holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle.
Model 2443 Lo-Pot holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. The Lo-Pot Blast Machines are designed for ease in abrasive loading.
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Yard portable, industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
FSV abrasive metering valve maintains smooth, consistent, adjustable media flow. Model 2443 Lo-Pot has a LPV abrasive metering valve.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
6 Cuft Lo-Pot Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 2443 Lo-Pot holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. The Lo-Pot Blast Machines are designed for ease in abrasive loading.
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Yard portable, industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
Model 2443 Lo-Pot has a LPV abrasive metering valve.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
8 Cuft Dual Chamber Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 2463 holds 8 cubic feet of abrasive. Available as single or dual outlet
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Yard portable, industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
20 Cuft Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 3680 holds 20 cubic feet of abrasive.
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Stationary industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
FSV abrasive metering valve maintains smooth, consistent, adjustable media flow.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
Contractor Series Blast Machines
2 Cuft Contractor Blast Machines
High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Maximum working pressure 150 psi
Minimum pressure 30 psi needed to operate OSHA-required remote control valves
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Two-wheel integral cart for ease of moving.
Rated for 150-psi maximum working pressure.
1-1/2-inch Millennium valve provides unrestricted air flow.
Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
29-inch width fits through standard doorways.
Two-wheel integral cart for ease of moving.
Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
Central hookup point for blast hose and remote controls.
Weather-resistant storage area holds manuals, paperwork and small parts.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
|
 |
4 Cuft Contractor Blast Machines
High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 4 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 5 nozzle (5/16-inch orifice).
Requirements for Operation
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Maximum working pressure 150 psi
Minimum pressure 30 psi needed to operate OSHA-required remote control valves
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Four-wheel integral cart for ease of moving.
Rated for 150-psi maximum working pressure.
1-1/2-inch Millennium valve provides unrestricted air flow.
Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
29-inch width fits through standard doorways.
1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch piping
Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
Central hookup point for blast hose and remote controls.
Weather-resistant storage area holds manuals, paperwork and small parts.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
|
 |
6 Cuft Contractor Blast Machines
High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (3/8-inch orifice).
Requirements for Operation:
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Maximum working pressure 150 psi
Minimum pressure 30 psi needed to operate OSHA-required remote control valves
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Four-wheel integral cart for ease of moving.
Rated for 150-psi maximum working pressure.
1-1/2-inch Millennium valve provides unrestricted air flow.
Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
29-inch width fits through standard doorways.
1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch piping
Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
Central hookup point for blast hose and remote controls.
Weather-resistant storage area holds manuals, paperwork and small parts.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
|
 |
10 Cuft Classic Blast Machines
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Model 3661 holds 10 cubic feet of abrasive.
Requirements for Operation
These items are required but not included with this equipment
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
|
Advantages
Stationary industrial-quality blast machines manufactured to ASME code.
1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
Approvals and Certifications
Clemco’s quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).
Clemco’s Classic machines are available in capacities 1/2 to 20 Cuft.
|
 |
ZERO Blast Cabinets
|
 |
BNP 220 Pressure Blast Cabinet
BNP blast cabinets deliver efficient, affordable media blasting to clean, peen, deburr, or finish parts. The BNP 220’s larger enclosure (50 by 39 by 43 inches tall) accepts powered turntables, ZERO’s A-300 Automation Kit, and other Option Plus modifications. Shown with dry filter dust collector. Also available with optional reverse-pulse dust collector.
For tough cleaning jobs, pressure blasting delivers higher abrasive velocity for greater impact intensity, compared to suction blasting, and can increase your production rate by as much as 300 percent.
|
BNP 220 Pressure Cabinets Feature:
Safety
Full-length, neoprene-on-fabric gloves resist wear and protect operator.
Ceiling-mounted, two-tube fluorescent light fixture with abrasive resistant Lexan® cover for extraordinary visibility.
Safety interlocks interrupt blasting if either door isopened. (Conforms to US regulations.)
Adjustable, heavy-duty chromed latches seal doors tight through years of service.
|
Productivity
High efficiency, 2.0 cubic foot capacity, ASME coded pressure vessel, fitted with 1″ ID piping, industrial-quality blast hose and couplings, and cabinet integrated controls.
Unique Air Logic system (pilot actuated) to maximize air flow to the blast gun.
Double-wall, sound-insulated doors, with industrial quality lift-off hinges.
14-gauge steel all-welded construction, with precisely formed bends, forms a rigid, long-lasting cabinet shell.
|
Convenience
Tilt-out window, for tool-free glass changes in minutes.
Pressure regulator, gauge, and electric switch mounted within easy reach.
Built-in blow-off gun helps keep dust inside the cabinet, not on your floor.
|
Common Applications
Remove rust, mill scale, heat scale, and carbon buildup from metals
Strip paint, powder coating, plating, and anodizing from parts for rework
Eliminate burrs, parting lines, flashings, and other defects from castings and injection-molded parts
Extract residual sand from castings
Beautify steel, stainless steel, aluminum, brass and other metals with a uniform matte finish
Etch artwork and lettering into glass, stone, plastics, metal and other materials
Clean release agents and material buildup from molds
|
 |
BNP 220 Suction Blast Cabinet
BNP blast cabinets deliver efficient, affordable media blasting to clean, peen, deburr, or finish parts. The BNP 220’s larger enclosure (50 by 39 by 43 inches tall) accepts powered turntables, ZERO’s A-300 Automation Kit, and other Option Plus modifications. Shown with 900 CFM reclaimer (free standing) and RPH dust collector.
|
BNP 220 Cabinets Feature:
Safety
Full-length, neoprene-on-fabric gloves resist wear and protect operator.
Ceiling-mounted, two-tube fluorescent light fixture with abrasive resistant Lexan® cover for extraordinary visibility.
Safety interlocks interrupt blasting if either door isopened. (Conforms to US regulations.)
Adjustable, heavy-duty chromed latches seal doors tight through years of service.
|
Productivity
Unique Air Logic system (pilot actuated) to maximize air flow to the blast gun.
Double-wall, sound-insulated doors, with industrial quality lift-off hinges.
14-gauge steel all-welded construction, with precisely formed bends, forms a rigid, long-lasting cabinet shell.
|
Convenience
Tilt-out window, for tool-free glass changes in minutes.
Pressure regulator, gauge, and electric switch mounted within easy reach.
Built-in blow-off gun helps keep dust inside the cabinet, not on your floor.
|
Common Applications
Remove rust, mill scale, heat scale, and carbon buildup from metals
Strip paint, powder coating, plating, and anodizing from parts for rework
Eliminate burrs, parting lines, flashings, and other defects from castings and injection-molded parts
Extract residual sand from castings
Beautify steel, stainless steel, aluminum, brass and other metals with a uniform matte finish
Etch artwork and lettering into glass, stone, plastics, metal and other materials
Clean release agents and material buildup from molds
|
 |
BNP 250 Wetblast Cabinet
ZERO BNP 250 Wetblast cabinets deliver affordable, dust-free media blasting to efficiently clean and finish all kinds of parts. The wetblast process produces a smooth surface, a bright shine, and does not produce static electricity common in dry blast operations.
|
BNP 250 Wetblast Cabinets Feature:
Safety
Dust-free wetblasting reduces worker exposure to dust and static electricity build-up generated by dry blasting.
Full-length waterproof neoprene-on-fabric gloves.
Safety interlocks interrupt blasting if either door is opened.
Double-wall, sound-insulated doors reduce noise.
|
Productivity
Fluorescent lighting brightly illuminates work chamber.
Generous 12.5″ by 19.5″ window gives operator commanding view.
150-cfm exhauster maximizes visibility inside cabinet.
Operator-controlled domestic-water wash system maintains clean window for clear view of work.
Foot pedal activates blast process and minimizes operator fatigue.
Fingertip-activated rinsing control speeds work flow.
|
Performance
14-gauge stainless steel cabinet and grating provide rust-free blasting environment.
Pressure regulator with gauge is within easy reach on light module. Toggle switches activate lighting, exhauster, and
diaphragm pump.
Diaphragm pump ensures ready supply of media/water to maintain efficient work flow.
Adjustable, heavy-duty chrome latches seal doors tight through years of service.
|
 |
BNP 260 Wetblast Cabinets
ZERO BNP 260 Wetblast cabinets deliver affordable, dust-free media blasting to efficiently clean and finish all kinds of parts. The wetblast process produces a smooth surface, a bright shine, and does not produce static electricity common in dry blast operations.
|
BNP 260 Wetblast Cabinets feature:
Safety
Dust-free wetblasting reduces worker exposure to dust and static electricity build-up generated by dry blasting.
Full-length waterproof neoprene-on-fabric gloves.
Safety interlocks interrupt blasting if either door is opened.
Double-wall, sound-insulated doors reduce noise.
Productivity
Fluorescent lighting brightly illuminates work chamber.
Generous 12.5″ by 19.5″ window gives operator commanding view.
150-cfm exhauster maximizes visibility inside cabinet.
Operator-controlled domestic-water wash system maintains clean window for clear view of work.
Foot pedal activates blast process and minimizes operator fatigue.
Fingertip-activated rinsing control speeds work flow.
|
Performance
14-gauge stainless steel cabinet and grating provide rust-free blasting environment.
Pressure regulator with gauge is within easy reach on light module.
Toggle switches activate lighting, exhauster, and
diaphragm pump.
Diaphragm pump ensures ready supply of media/water to maintain efficient work flow.
Adjustable, heavy-duty chrome latches seal doors tight through years of service.
|
