Advantages

• Manually Adjustable, Easy to Use Tools
• Suit a Variety of Coatings
• Increase Production
• Simple Design = Reliable
• Increase Production
• Simple Design = Reliable Performance
• No Need to Rotate the Pipe
• 95% Transfer Efficiency

Clemco Spin-Kote Internal Painting System

 

The Clemco Spin-Kote tool allows for you to evenly coat in the interior of pipe and tubing with an inside diameter between 2” – 96” using an airless pump*.  Once in operation, the coating is applied 360° by centrifugal force through the spinning spray head.  The speed at which the tool is pulled back through the pipe will determine the coating’s wet film thickness and coverage rates.  Pre-selected back pressure orifices installed at the gun head and adjustments to the pump’s fluid pressure will allow you to make changes to the volume of coating transferred through the tool.  Each tool comes packaged with its appropriate carriage device so that it can centered within the pipe.


Spin-Kote Options

 

27020 Spin-Kote 25 2” – 5” ID Pipe

27021 Spin-Kote 512 5” – 12” ID Pipe

27022 Spin-Kote 817 8” – 17” ID Pipe

27023 Spin-Kote 1236 12” – 36” ID Pipe

27024 Spin-Kote 4896 48” – 96” ID Pipe

 

 

Spin-Kote Accessories

 

243-283 Graco Silver Plus Airless Spray Gun

ALH25253300 1/4″ X 25’ Airless Hose (3,300 PSI)

ALH25503300 1/4″ X 50’ Airless Hose (3,300 PSI)

27115 Back Pressure Assembly (Less Tip)

27116 Back Pressure Orifice (0.18”)

21717 Back Pressure Orifice (0.31”)

27118 Back Pressure Orifice (0.39”)

SpinKote Sales Brochure (Brochure PDF Attached Here)

SpinKote Service Manual (Service Manual PDF Attached Here)

Brochure: Open PDF

Service Manual: Open PDF


Clemco Orbiter I & Orbiter III

The Clemco Orbiter system is similar in function to the Spin- Kote system but with the added benefits of complete tool control at the handle, air operated centering carriages and a larger selection of available tip sizes.  The handheld control allows the operator to control the start/stop functions of the spinning head, the on/off flow of the fluid material and the precise air regulation of the carriage legs allowing you to quickly expand and contract the centering device.   Manual pulling of the tool back through the pipe is still required and this determine the wet film thickness and coverage rates.  

Orbiter I

90901 Orbiter I system complete, 3.5” – 7” ID pipe (Includes gun, 10’ control hose & 11’ paint hose)

93327 Orbiter I system complete, 3.5” – 7” ID pipe (Includes gun, 16’ control hose & 18’ paint hose)

93329 Orbiter I system complete, 3.5” – 7” ID pipe (Includes gun, 32’ control hose & 34’ paint hose)

93331 Orbiter I system complete, 3.5” – 7” ID pipe (Includes gun, 48’ control hose & 52’ paint hose)

Orbiter III

90902 Orbiter III system complete, 7” – 37” ID pipe (Includes gun, 10’ control hose & 11’ paint hose)

93328 Orbiter III system complete, 7” – 37” ID pipe (Includes gun, 16’ control hose & 18’ paint hose)

93330 Orbiter III system complete, 7” – 37” ID pipe (Includes gun, 32’ control hose & 34’ paint hose)

93332 Orbiter III system complete, 7” – 37” ID pipe (Includes gun, 48’ control hose & 52’ paint hose)

Brochure: Open PDF

Service Manual: Open PDF